P LASMA M ONITOR † 3341 Align the cursor with23Move the cursor left and right withthe POSITION/CONTROL buttons.INPUT SELECTRGB2SCARTVIDEO: RGB: OFF: BNCINPUT SELECTRGB2SCARTVIDEO: RGB: OFF: BNCAlign the cursor with the desired itemAdjust with the POSITION/CONTROL buttonsMove the cursor up and down withthe POSITION/CONTROL buttons.Press the EXIT button 2 timesPress the EXIT button one time to return to the main menu.One further press removes the menu.Input Selection (INPUT SELECT)This performs RGB 2 input selection and sets the SCART jack and VIDEO connector.Preparation Press the PROCEED button to display the main menu.RGB 2Selects the signal connected to the RGB 2/DVD/HD IN con-nector.[RGB] : Set at time of RGB signal input[DVD/HD] : Set at time of DVD/HD signal inputSCART[OFF] : Set so that the SCART jack is not connected[ON] : Set to connect the SCART jack* The SCART jack is not used in the United States. Normallyselect [OFF].If you select [ON], images will not be correctly displayed.VIDEOSelect the connector that is assigned to the VIDEO input.[BNC] : The setting is to the VIDEO IN connector.[S-VIDEO] : The setting is to the S-VIDEO IN connector.
