42 †PLASMA MONITOROther Functions (OTHER SETTINGS)Note: Power Management Function• The power management function is an energy-saving function that au-tomatically reduces the power consumption of the monitor when thekeyboard or mouse have not been operated for a fixed period. Thisfunction becomes valid when combined with a personal computer thatis based on the VESA DPMS system.• When power is not being supplied to the personal computer or whenthe personal computer and this monitor are not properly connected,the power management function will operate and this monitor will en-ter the "off state."• Please see your personal computer user's manual for information aboutthe power management function of the personal computer side.• During power management mode the fan may stop, but this is not amalfunction.Power Manage-ment ModeOn StateStandby StateSuspend StateOff StatePOWER/STANDBYIndicatorGreenYellowOrangeOrangePower ManagementOperation StatusNot operatingOperatingOperatingOperatingRecovery MethodNot required since the personal computer is nor-mally being used at this time.Press a keyboard key or move the mouse. Thescreen will be displayed immediately.Press a keyboard key or move the mouse. Thescreen will be displayed; however, it will take sometime from the standby state until the screen is dis-played.Press a keyboard key or move the mouse. Thescreen will be displayed; however, it will take sometime from the standby state until the screen is dis-played.DetailsHorizontal/vertical sync sig-nals are being input from thepersonal computer.Horizontal sync signal is notbeing input from the personalcomputer.Vertical sync signal is notbeing input from the personalcomputer.Horizontal/vertical sync sig-nals are not being input fromthe personal computer.POWER/STANDBY IndicatorThe status of the power management function can be checked with the POWER/STANDBY indicator of the monitor.