P LASMA M ONITOR † 274Audio Settings (SOUND)This menu sets the volume, balance, mute, and selection of input.Note that only sound of the currently displayed signal is output.Preparation Press the PROCEED button to display the main menu.1 Align the cursor with23Move the cursor left and right withthe POSITION/CONTROL buttons.VOLUMEBALANCEMUTEINPUT1INPUT2: OFF: VIDEO: RGB1VOLUMEBALANCEMUTEINPUT1INPUT2: OFF: VIDEO: RGB1VOLUMEBALANCEMUTEINPUT1INPUT2: OFF: VIDEO: RGB1Align the cursor with the desired itemAdjust with the POSITION/CONTROL buttonsMove the cursor up and down withthe POSITION/CONTROL buttons.Press the EXIT button 2 timesPress the EXIT button one time to return to the main menu.One further press removes the menu.Adjustment Screen[VOLUME] : Adjusts the volume[BALANCE] : Adjusts the left and right volume balance.[MUTE] : Switches off the sound (temporarily)[OFF] : There is sound.[ON] : Sound is switched off.[INPUT 1] : Each press serves to advance the audio inputof AUDIO IN 1 by one step.[INPUT 2] : Each press serves to advance the audio inputof AUDIO IN 2 by one step.RGB 3DVD/HDVIDEO RGB 1 RGB 2 orVIDEORGB 3RGB 1 DVD/HDRGB 2 or Decrease Increase L R L R Left side becomes stronger Right side becomes stronger Note:Adjustments of [VOLUME], [BALANCE], [MUTE] will be stored in memoryfor each input (VIDEO, RGB 1-3, DVD/HD, and SCART). To change thesesettings, first display the source of which audio input you wish to adjust.
