Control PanelInterface SetupSetting Item Description, InstructionsEOP Timer Specify the timeout period before cancellation of print jobsthat cannot be received by the printer.IP Mode Choose whether the printer IP address is conguredautomatically or a static IP address is entered manually.DHCPBOOTPProtocolRARPSpecify the protocol used to congure the IP addressautomatically.IP AddressSubnet MaskTCP/IPIP SettingDefault G/WSpecify the printer network information when using a staticIP address.Enter the IP address assigned to the printer, as well as thenetwork subnet mask and default gateway.NetWare Specify the NetWare protocol. To apply your changes,choose Register Setting.Frame Type Specify the frame type to use.NetWarePrint Service Choose the print service.AppleTalk Specify whether to use the AppleTalk protocol. To applyyour changes, choose Register Setting.Auto Detect Specify the communication method. To apply yourchanges, choose Register Setting.Choose On for automatic conguration of the LANcommunication protocol. Choose Off to use settingsvalues of Comm.Mode and Ethernet Type.Comm.Mode Choose the LAN communication method.Ethernet Type Choose the LAN transfer rate.SpanningTreeChoose whether spanning-tree packets are supportedover the LAN.EthernetDriverMAC Address Displays the MAC address.ReturnDefaultsExecute? is displayed if you press the ▼ button. ChooseOK to restore the network settings to the default values.Printer Parts 65
