Messages regarding paperBorderless printng not possible.Check roll width and spacers.Cause Corrective ActionInsert the paper and Spacer for Borderless Printingrmly all the way into the printer.When using A1 or A2 rolls, attach the Spacer forBorderless Printing before loading the roll.(→P.143)The paper is loaded askew.When using sizes other than A1 or A2, remove theSpacer for Borderless Printing before loading the roll.(→P.143)The paper loaded is not compatible with borderlessprinting.Load paper compatible with borderless printing andtry printing again. Paper you can use for borderlessprinting is restricted to particular types of paper androlls of particular widths. For information on types ofpaper compatible with borderless printing, refer to thePaper Reference Guide. (→P.108)Because paper expands or contracts depending onthe environment of use, it may become narrower orwider than the supported width for borderless printing.Use each type of paper only where the recommendedenvironmental conditions are met. For details onenvironmental conditions for various paper, see thePaper Reference Guide. (→P.108)Check supported paper.Cause Corrective ActionFollow these steps to change the settings of the printjob to enable borderless printing.1.Hold down the Stop button for a second or moreto cancel printing.2.Make sure the correct printer driver for the printeris selected and try printing again.For information on types of paper compatible withborderless printing, refer to the Paper ReferenceGuide. (→P.108)The print job received species a type or width ofpaper that is not compatible with borderless printing.If you press the Online button and continue printing,the document will be printed with a border.696 Error Message
