Network SettingSpecifying Printer-Related InformationFollow the steps below to specify device information and security settings.1. Start the web browser and enter the following URL in the Location (or Address) box to displaythe RemoteUI page.http://“printer IP address or name”/Example: http://xxx.xxx.xxx.xxx/2. Select Administrator Mode and click Logon.3. If a password has been set on the printer, enter the password.4. Click Information in the Device Manager menu at left to display the Information page.5. To display the relevant settings page, click Edit in the upper-right corner of Device Informationor Security, depending on what information you want to specify.6. Refer to the tables of settings items for device information and security settings to completethe settings.Device information settings itemsItem Details Default SettingDevice Name Specify the device name.(0-32 characters)(Blank)Location Specify where the device is installed.(0-32 characters)(Blank)Administrator Identify the administrator.(0-32 characters)(Blank)Phone Specify the device administrator’s contactinformation.(0-32 characters)(Blank)Comments(E-mail) Enter any notes from the device administrator.(0-32 characters)(Blank)Security settings itemsItem Details Default SettingOld Password Enter the current device password.(0-15 characters)(Blank)New Password Enter a new password.(0-15 characters)(Blank)Conrm Enter the new password again to conrm it.(0-15 characters)(Blank)Besides entering a password, you can specify other security-related information, such as IPaddress-based SNMP or TCP usage restrictions, MAC address-based access restrictions, orIPP authentication settings.7. Click OK to activate the settings.492 Network Setting
