Canon imagePROGRAF iPF6200 User Manual

Also see for imagePROGRAF iPF6200: Manual Brochure & specs Brochure & specs Brochure Service manual

Contents

Canon imagePROGRAF iPF6200 User Manual Manual pdf 133 page image

Handling rollsLoading Rolls on the Roll HolderNote• For details on supported sizes and types of the roll that can be loaded, see “Paper Sizes” or the PaperReference Guide. (→P.113) (→P.108)• Align the edges of the paper on both ends of the roll.• If the edge of the roll is bent or soiled, use the Paper Cutting operation of the printer to cut the edge ofthe paper manually. (→P.135)• If the paper is badly creased or bent, cut the edge of the roll with scissors before loading the roll inthe printer, and then cut the edge of the paper manually using the Paper Cutting operation of theprinter. (→P.135)• To load a roll with a 3-inch paper core, insert the 3-Inch Paper Core Attachment on the roll holder andattach the 3-Inch Paper Core Holder Stopper. (→P.143)• If you use a roll A1, A2 or larger for Borderless Printing, insert the provided Spacer for BorderlessPrinting on the Roll Holder.Follow the steps 3 and 4 below.1. Remove the Holder Stopper from the Roll Holder.2. With the Roll Holder sideways and the edge of the roll paper facing forward as shown, insertthe roll in the Roll Holder from the left. Insert the roll rmly until it touches the ange (a) ofthe Roll Holder.Handling Paper 119