Other MessagesOther MessagesGARO Wxxxx (x represents a number)Cause Corrective ActionTry printing again, using the correct printer driver.There is a problem with the print job.It is also possible to continue printing in this state.However, you may not be able to obtain the desiredprinting results.ERROR Exxx-xxxx (x represents a letter or number)Cause Corrective ActionAn error requiring service may have occurred. Write down the error code and message, turn off theprinter, and contact your Canon dealer for assistance.Hardware error. xxxxxxxx-xxxx (x represents a letter ornumber)Cause Corrective ActionThe last portion of roll paper was used during aprint job. The paper was not advanced because thetrailing edge is taped to the roll.Turn off the printer and remove the roll from theprinter before restoring power.Fastening tape or the Belt Stopper has not beenremoved inside the Top Cover.Turn off the printer, open the Top Cover and removethe tape or the Belt Stopper before restoring power.An error requiring service may have occurred. Turn off the printer and wait at least three secondsbefore restoring the power.If the message is displayed again, write down theerror code and message, turn off the printer, andcontact your Canon dealer for assistance.Prepare for parts replacement.Cause Corrective ActionIt is almost time to replace consumables for whichservice is required.If Parts replacement time has passed. is displayed,you can continue to use the printer for some time.Contact your Canon dealer for assistance.706 Error Message
