Messages regarding paperCannot cut paper.Cause Corrective ActionThere are sheets left on the Ejection Guide. Remove the paper.There is a foreign object by the Output Tray,obstructing the Cutter Unit.Remove the foreign object.You are not using the printer under the recommendedenvironmental conditions for the paper.Use the printer only where the recommendedenvironmental conditions for the paper are met.Note that various environmental conditions arerecommended for various types of paper. For detailson the recommended environmental conditions forpaper, see Paper Reference Guide".(→P.108)You are using paper that is not compatible withautomatic cutting.Specify Manual as the method for cutting rolls andcut the roll manually.(→P.135)For details on automatic cutting compatibility, see thePaper Reference Guide.(→P.108)The Cutter Unit stops in the middle of cutting. Move the Cutter Unit to the left, and then remove theroll paper. If cutting is not possible using the CutterUnit, specify Manual as the method for cutting rollsand cut the roll manually.(→P.127)(→P.135)In other cases, the Cutter Unit may be damaged. Contact your Canon dealer for assistance.*If this message is displayed, you can resume the print job.End of paper feed.Cause Corrective ActionYou are pressing the ▲ button on the Control Paneland trying to rewind the roll to the edge.Release the ▲ button.Error Message 695
