Canon imagePROGRAF iPF6200 User Manual

Also see for imagePROGRAF iPF6200: Manual Brochure & specs Brochure & specs Brochure Service manual

Contents

Canon imagePROGRAF iPF6200 User Manual Manual pdf 138 page image

Handling rollsRemoving the Roll from the PrinterNote• If you have activated automatic detection of the remaining roll paper, always follow these steps toremove rolls. You will be unable to manage the amount of roll paper left if you remove the roll beforethe barcode is printed.• When a roll has been advanced, do not pull it out by force. This will prevent the paper from beingadvanced, and you will be unable to manage the amount of roll paper left.If you accidentally pull out the paper, hold down the Stop button to enable feeding.1. Press the Load/Eject button.A conrmation message is displayed regarding removal of the roll.2. Press the OK button.The roll can now be removed.Note• If you need to cut the roll, select Paper Cutting and cut the roll at the desired position. (→P.135)• If you have selected Media Menu > Chk Remain.Roll > On in the printer menu and the printeddocument has been ejected, a barcode and brief text message are printed on the leading edge ofrolls.If the document is not cut but kept in the printer, only the text message is printed. This is also thecase when printing on 8-inch rolls or clear lm.Next, when removing rolls from the Roll Feed Unit, see “Removing Rolls from the Roll FeedUnit”. (→P.125)124 Handling Paper