Canon imagePROGRAF iPF6200 User Manual

Also see for imagePROGRAF iPF6200: Manual Brochure & specs Brochure & specs Brochure Service manual

Contents

Canon imagePROGRAF iPF6200 User Manual Manual pdf 130 page image

Handling rollsHandling rollsSelecting the Paper SourceWhen selecting Paper Feed Slot, press the Feeder Selection button.You can determine which Paper Feed Slot is selected by checking which lamp is lit, the Roll Media lamp(a) or the Cut Sheet lamp (b).• Roll Media lamp : Selected when printing on Roll Media.• Cut Sheet lamp : Selected when printing on Sheets from the Top Paper Feed Slot or Front PaperFeed Slot.Note• If any paper is loaded that will not be used, a message is shown on the Display Screen, either Removeroll? or Eject sheet? when you press the Feeder Selection button.When removing the paper, press the OK button. (→P.145)• You cannot switch the paper source in the following situations:• If the Message lamp is ashingCheck the message on the Display Screen and take action as necessary. (→P.684)• If the Data lamp is ashingSelect the paper source after printing.• If a printer menu operation is in progressSelect the paper source after the menu operation.• When in the process of loading paperFinish loading the paper before selecting the paper source.• When in the process of replacing Ink TanksFinish replacing the Ink Tanks before selecting the paper source.• If the Top Cover is openClose the Top Cover before selecting the paper source.116 Handling Paper