Canon imagePROGRAF iPF6200 User Manual

Also see for imagePROGRAF iPF6200: Manual Brochure & specs Brochure & specs Brochure Service manual

Contents

Canon imagePROGRAF iPF6200 User Manual Manual pdf 706 page image

Messages regarding paperThe roll is empty.Cause Corrective ActionThere is no more paper left on the roll. Follow the steps below to replace the used roll with anew roll of the same type and size.1.Remove the roll.(→P.124)(→P.125)(→P.126)2.Load the new roll.(→P.119)(→P.121)(→P.122)3.If no barcode was printed on the roll, specify thepaper type.(→P.117)4.If no barcode was printed on the roll, specify thepaper length.(→P.118)*If this message is displayed, you can resume the print job.Roll feed unit errCause Corrective ActionTurn off the printer, remove the Roll Feed Unitmomentarily, and then reinstall it.(→P.146)(→P.147)The Roll Feed Unit is not working.If the message is still displayed after you do this,contact your Canon dealer for assistance.No Roll Feed Unit.Cause Corrective ActionThe printer has received a print job that speciesrolls, but the Roll Feed Unit is not installed.Install the Roll Feed Unit and resend the print job.(→P.147)Sheet printing is selected.Cause Corrective ActionLoad a sheet and try printing again.You have attempted to print a test print sheet or otherprinter status information on a sheet, but no sheetis loaded. To print on a roll instead, hold the Stop button formore than a second to cancel printing, load a roll,and then print. (→P.93)692 Error Message