Printing procedurePrinting from Mac OS XPrint from the application menu after registering the printer.Important• We recommend exiting unnecessary applications before printing. Running several applications whileprinting may interrupt the transfer of print data and affect printing quality.Registering the printerBefore printing, you must register the printer in Printer Setup Utility (or Print Center ).For instructions on registering the printer, see “Conguring the Printer Driver Destination (Macintosh)”.(→P.510)Important• During this setup process, the printer will not be listed among available printers if it is off or disconnected.• By factory default, the AppleTalk protocol is disabled on the printer. You must enable the AppleTalkprotocol before using the printer in an AppleTalk network. For instructions on activating AppleTalkprotocol, see “Conguring the Destination for AppleTalk Networks (Macintosh)”. (→P.512)Note• For Canon IP(iPF) connections, enter the printer’s IP address.Printing from the application software1. In the application software, select Print from the File menu to display the dialog box for printingconditions.Note• This dialog box includes basic printing options and enables you to choose the printer, specify therange of pages, number of copies, and so on.2. Select the printer in the Printer list.Basic Printing Workow 101
