Messages regarding paperManual printing is selected, but a roll is loaded.Cause Corrective ActionHold down the Stop button for a second or more tocancel printing.If there is a printed document in the output tray, selectPaper Cutting in the printer menu and cut the roll atthe desired position.(→P.135)Load paper of the type and size you have specied inthe printer driver and try printing again.(→P.98)A print job for manually printing on sheets was sentwhen a roll is loaded.Hold down the Stop button for a second or more tocancel printing. Change the printer driver settings tomatch the roll already loaded, and then try printingagain.Wrong paper feed slot for this paper type.Cause Corrective ActionThe Paper Feed Slot where paper is loaded does notmatch the Paper Feed Slot specied as the papersource.Try printing again after changing the settings in theprinter driver so that the Paper Feed Slot where paperis loaded matches the Paper Feed Slot specied asthe paper source. (→P.98)Paper jam.Cause Corrective ActionA paper jam occurred in the printer during printing. Press the Load/Eject button and remove the jammedpaper.(→P.127)(→P.159)You have loaded and printed on a roll when sheetsare selected as the paper source on the ControlPanel.Press the Load/Eject button, remove the roll, andload a sheet. Otherwise, select the roll as the mediasource on the Control Panel and reload the roll.*If this message is displayed, you can resume the print job.Error Message 693
