Control PanelSetting Item Description, InstructionsCutting Mode Specify whether or not to cut with the standard round-bladedcutter.Choose Automatic to have the roll cut automatically afterprinting. If you choose Eject, the paper is cut after you holddown the Stop button for a second or more. If you chooseManual, the paper will not be cut after printing. Instead, a linewill be printed at the cut position.Bordless Margin Adjust the margin during borderless printing.Choose Automatic to have the printer automatically detect thepaper width and congure the margin settings for borderlessprinting. If margins are mistakenly created when Automatic isselected, choose Fixed. In this case, the paper width is notdetected automatically, and the document is printed withoutborders, using the margin settings required by the printer.CutDustReduct. Choose On to reduce the amount of debris generated whencutting lm and similar media by printing a line at the cutposition. This option reduces the amount of debris given off aftercutting. It also helps prevent adhesive from sticking to the cutterand keeps the cutter sharp if you use adhesive paper. (→P.141)NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure betterprinting quality at the leading edge.Note that if you choose 3mm, it may lower the printing qualityat the leading edge and affect feeding accuracy. The printedsurface may be scratched, and ink may adhere to the leadingedge.Manual Feed When printing manually, choose the Paper Feed Slot. Normally,choose Top. For heavyweight paper such as POP Board,choose Front.(The paper type isdisplayed here.)(*1)Return Defaults Choose Yes to restore Paper Details to the factory defaultvalues.*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.(→P.108) The paper type setting in the printer driver and related software (as well as on the ControlPanel) is updated when you install the printer driver from the User Software CD-ROM or if you changepaper information by using the Media Conguration Tool.62 Printer Parts
