Canon imagePROGRAF iPF6200 User Manual

Also see for imagePROGRAF iPF6200: Manual Brochure & specs Brochure & specs Brochure Service manual

Contents

Canon imagePROGRAF iPF6200 User Manual Manual pdf 641 page image

PrintheadsReplacing the PrintheadFollow the steps below to replace the Printhead. Failure to follow this procedure may cause ink leak fromthe Printhead, which may cause stains.Note• Prepare a new Ink Tank when ink levels are low.• Your hands may become dirty during Printhead replacement. Use the gloves provided with the newPrinthead for replacement.• Choose On in Auto Print to have the printer automatically adjust the Printhead alignment afterreplacement of the Printhead. (→P.59)1. If the roll is not ejected because of the cutting method selected, cut it manually and remove it.(→P.367)2. Clean inside the Top Cover. (→P.641)3. Press the Menu button to display MAIN MENU.4. Press ▲ or ▼ to select Maintenance, and then press the ► button.5. Press ▲ or ▼ to select Replace P.head, and then press the ► button.6. Press ▲ or ▼ to select the Printhead for replacement, and then press the ► button.7. Press ▲ or ▼ to select Yes, and then press the OK button.Select Printhead L to replace the Printhead L or select Printhead R to replace the PrintheadR. Be sure to specify the correct printhead.Ink is now lled.After about three minutes, a message is shown on the Display Screen instructing you to openthe Top Cover.8. Open the Top Cover.Instructions are now shown on the Display Screen regarding Printhead replacement.Maintenance 627