Color adjustmentPhoto PaperPlus Compatible Compatible CompatiblePhoto Pro Plat. Compatible Compatible CompatibleFineArt Photo Compatible Compatible CompatibleFneArt HW Photo Compatible Compatible CompatibleComm Proong - Compatible CompatibleRC Proong 210 - Compatible CompatibleProong Paper Compatible Compatible CompatibleOpaque Paper - Compatible -Art Extr Smooth - Compatible -• Optimal adjustment values from color calibration are also applied for paper other than the type you useto execute color calibration when printing on that other type of paper.• In the printer driver or in the MAIN MENU of the Control Panel, you can specify whether to apply theadjustment value from color calibration when printing. The printer driver settings are given priority.For menu details, see “Main Menu Settings”. (→P.59)For information on printer driver settings, refer to the following topics.• Printer Driver Settings (Windows) (→P.394)• Printer Driver Settings (Mac OS X) (→P.447)• Before color calibration, ensure the printer is not exposed to direct sunlight or other strong sources oflight.• If you reinstall the printer driver and change the region selection of the Media Conguration Tool,region-specic paper information originally registered on the printer before installation will be deleted. Ifthe information of paper you used for color calibration is deleted, such color calibration can no longer beapplied to any type of paper. To apply the results of color calibration, perform color calibration againusing paper supported in the newly selected region and compatible with color calibration. See the MediaConguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh)• Default settings will be restored if you select MAIN MENU > System Setup > Reset PaprSetngs > Yes.Because information added or updated using the Media Conguration Tool is also deleted, if paper ofwhich information was added using the Media Conguration Tool was used for color calibration and isnow deleted, such color calibration can no longer be applied to any type of paper. To apply the resultsof color calibration, perform color calibration again using a paper included originally in the defaultsettings that is compatible with color calibration. See the Media Conguration Tool Guide (Windows)or Media Conguration Tool Guide (Macintosh).Note• For further adjustment of the color of documents as printed applying color calibration, adjust the color inthe printer driver. (→P.206)• You can check when color calibration was executed and what paper was used from Status Print,imagePROGRAF Status Monitor (in Windows) or imagePROGRAF Printmonitor (on a Macintoshcomputer) in the MAIN MENU on the Control Panel.For menu details, see “Main Menu Settings”. (→P.59)For details on imagePROGRAF Status Monitor, refer to the imagePROGRAF Status Monitor help.For details on imagePROGRAF Printmonitor, refer to the imagePROGRAF Printmonitor help.Adjustments for Better Print Quality 589
