Printer DriverAmbient Light AdjustWhen you select By selecting a chart number in Setting MethodSetting Item DescriptionA Setting Method You can choose conguration based on the printed Chart or based onusing the i1 colorimeter.B Print Chart Click to start the Light Source Check Tool, for printing Charts. The LightSource Check Tool must be installed to use this function.C Chart Number In Chart, select the number of the pattern with your desired colors.D Color Temperature Enter the Color Temperature measured during monitor calibration.Displayed when the Matching Method is set to Monitor Matching onthe Matching sheet.E Illuminance Enter the Illuminance measured during monitor calibration. Displayedwhen the Matching Method is set to Monitor Matching on the Matchingsheet.When you select By entering values directly in Setting MethodSetting Item DescriptionA Setting Method You can choose conguration based on the printed Chart or based onusing the i1 colorimeter.B Lighting Source Type Select the light source measured using the i1 colorimeter.D Color Temperature Enter the Color Temperature measured using the i1 colorimeter.E Illuminance Enter the Illuminance measured using the i1 colorimeter.Displayed when the Matching Method is set to Monitor Matching onthe Matching sheet.Note• For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.206)Windows Software 417
