Printer partsf. Online ButtonSwitches the printer online and ofine. (→P.34)• On (Green)The printer is online.• FlashingThe printer is recovering from Sleep mode.• OffThe printer is ofine.g. Feeder Selection ButtonSwitches the paper source. Each time you press this button, the paper source switches between rollfeed (when the paper source is a roll) and sheet feed (when the paper source is the Tray or FrontPaper Feed Slot). The corresponding lamp in the paper source section is lit.h. Menu ButtonDisplays the main menu of the printer. (→P.59)i. Information ButtonDisplays printer submenus. Press this key to display information about ink, paper, and so on.(→P.73)You can also hold down this button for three seconds to clean the Printhead ( Head Cleaning A).j. ◄ ButtonMenu mode: Press this button to display the menu one level higher.When you are entering numbers, the button moves the cursor to the next digit.The instructions can be paused when [← Pause] is displayed.When [← Back] is displayed, you can access the previous instruction screen.k. ▲ ButtonOfine mode: Press this button to rewind rolls manually. (→P.131)Menu mode: Press this button to display the previous menu item or setting value.l. ► ButtonMenu mode: Press this button to display the menu one level lower.When [Fwd →] is displayed, you can access the next instruction screen.m.▼ ButtonOfine mode: Press this button to feed roll paper manually. (→P.131)Menu mode: Press this button to display the next menu item or setting value.n. OK ButtonIn menu mode, press this button to conrm or execute the selected item or setting.At other times, pressing this button enables you to access the next screen after following theinstructions on the Display Screen.o. Power ButtonTurns the printer on and off. (→P.27)p. Load/Eject ButtonYou can check instructions on loading, replacing, and removing paper. Instructions for loadingor replacing paper are shown on the Display Screen if pressed when no paper is loaded, andinstructions for removing paper are shown if paper is loaded.22 Printer Parts
