4–31COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEM6. Points to Notea. The collars for the pick-up roller are identified bycolor; use the gold collar for the front, and thesilver collar for the rear.b. Do not separate the rubber portion of the pick-up roller from the collar.7. Removing the Feeding Roller1) Remove the pick-up roller from the front.2) Remove the mounting screw q, and removethe pick-up roller arm bushing w.Figure 4-3633) Remove the pick-up roller arm e and the weightr from the pick-up roller shaft.Figure 4-36412344) Remove the stop ring t from the feeding roller.Figure 4-3655) Remove the pick-up roller from the rear, andremove the pick-up roller shaft from the bushingat the rear.6) Remove the drive belt y from the feeding rolleru, and remove the feeding roller and the rollershaft i.Figure 4-3665678
