4–22 COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEMD. Feeding Assembly1. Removing the Feeding Belt1) Remove the mounting screw w, and removethe feeding center guide w.2) Pull the feeding roll e toward the fixing assem-bly, and remove it.3) Remove the feeding roll r, and remove thefeeding belt t.Figure 4-327Caution:Do not touch the transfer roller. Take care not todamage the joint between the feeding rolls.2. Removing the Feeding Fan1) Remove the feeding belt. (See “Removing theFeeding Belt.”)2) Remove the three mounting screws q, andremove the feeding fan w.Figure 4-328E. Delivery Assembly1. Removing the Delivery Roller1) Open the top body.2) Remove the E-ring q.3) Shift the bushings (rear) w and (front) e; then,remove the delivery roller r.Figure 4-3293123445 521132 4 1
