4–17COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEMB. Multifeeder Assembly1. Removing the Multifeeder Pick-upRoller Unit1) Open the right door.2) Remove the E-ring q, and pull out the bushingw.3) Remove the two screws e.Figure 4-3094) Remove the screw r, and remove the rollercover t.Figure 4-3105) Shift the multifeeder pick-up roller unit y to-ward the rear, and remove it.Figure 4-3112. Removing the Multifeeder Pick-UpRoller1) Remove the multifeeder pick-up roller unit. (See“Removing the Multifeeder Pick-Up Roller Unit.”)2) Remove the stop ring (plastic) q, and removethe pick-up roller w together with its collar.Caution:Take care not to lose the pin from the rear.Figure 4-312123451 26
