GENERAL DESCRIPTIONCOPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)1–16B. Making Copies1) Place your originals.a. Placing originals on the platen glass• Lift the platen glass cover.• Place your original on the platen glass. Thesurface that you want to copy must facedown. Align the edge of the original with the →mark in the centre of the platen glass.• Gently lower the platen glass cover.Figure 1-403b. Placing originals in the ADF or RDF (option)• Adjust the slide guides to fit the size of youroriginals.• Neatly stack your originals face up in theoriginal tray.Figure 1-4042) Programme the copy settings.• Press the0 -9 keys to enter the number ofcopies.• Press the - keys to adjust the copyexposure.• Press the key to select the copy paper size.• Press the - keys to select a presetcopy ratio.3) Press the key.a. After copying begins, you cannot change thenumber of copies, paper size, copy ratio orother copy settings.b. The copier’s counter automatically counts upone as each copy is output to the copy tray.Figure 1-405c. If you want to stop the copier before copying iscomplete, press the key.Reference:Pressing the key will not clear the copysettings. To clear the copy settings, press thekey.Figure 1-406258714C 0N A2 35 68714C 09
