GENERAL DESCRIPTIONCOPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 1–17C. Using the Stack BypassYou can place up to 50 sheets of copy paper (astack approximately 5 mm high) in the stack bypassto be automatically fed into the copier. Use the stackbypass when you want to copy on special stock,such as transparencies or labels, or when the papersize that you want to copy on will not fit in a cassette.Note:Note the following points when using the stackbypass:a. Paper size: A5 (horizontal placement) to A3b. Paper weight: 64 to 128 g/m2c. Acceptable paper• Plain paper (64 to 128 g/m 2)• Coloured paper• No. 2 master drawing paper• Labels• Transparencies• Postcards• Recycled paperd. Curl down copy stock before use.e. There are some types of copy stock which meetthe above specifications but which cannot befed in the stack bypass.Notes:1. Do not use the sort/staple-sort/group modewhen copying postcards as it may result ina paper jam.2. A5R-size copy paper cannot be used tomake two-sided or overlay copies.3. Insert A4-size labels horizontally.4. If you want the copy stock placed in thestack bypass to be selected when usingAuto Paper Selection, specify the size.1) Place your originals.Figure 1-407Figure 1-4082) Programme the copy settings.3) Open the stack bypass.Figure 1-409
