4–18 COPYRIGHT © 1998 CANON INC. CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)MECHANICAL SYSTEM3. Points to Note When Installing theMultifeeder Pick-Up RollerWhen installing the multifeeder pick-up roller q,make sure that the side with a cross w on the collaris toward the rear.Figure 4-3134. Removing the Separation Pad1) Open the upper right door.2) Remove the two screws q, and remove theseparation pad w.Caution:Take care so that the spring on the separationpad assembly will not fly off.Figure 4-3145. Removing the Multifeeder SpringClutch1) Remove the upper rear cover and the lower rearcover.2) Remove the three screws q, and shift the cordguide w.Figure 4-3153) Remove the main motor. (See “Removing theMain Motor.”)4) Remove the three screws e, then, remove theclutch stop plate y and the clutche u.Figure 4-316(front of copier)2112211337 6
