Loading PaperXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide4-5Loading PaperTypes of paper loaded in traysThe machine automatically detects the size and orientation of paper loaded in a tray, but the papertype must be set manually. Each tray's default paper type setting is Plain 1 paper. Change the papertype setting when loading a different type of paper. You can also set a non-standard paper size asCustom Size paper in Tray 5 (the bypass tray).For information on how to change the paper type setting, refer to Changing the Paper Settings onpage 4-11.Automatic Paper SelectionWhen processing a print job, specify the settings in the print driver 's screen by selecting AutomaticallySelect for Select By Tray under Paper in the Paper/Output tab. The machine automatically selects atray to match the specified document size and orientation. This function is called Automatic PaperSelection.To activate Automatic Paper Selection when copying, set Paper Supply to Auto.The Automatic Paper Selection function selects the trays in order from Tray 1 > Tray 2 > Tray 3 > Tray 4> Tray 5 if there is more than one paper tray that matches.Notes• Trays 2 to 4 are optional components.• When the machine runs out of paper during copying or printing, the tray switches to the next traycontaining paper of the same size and orientation or the tray set in priority. If the tray containingpaper of a different size or orientation is selected and runs out of paper again, the printing processis paused until paper is loaded instead of switching to the next tray (Auto Paper Selectionfunction).For more information on setting the Auto Paper Selection function, refer to Auto Paper Selection onpage 9-48.
