ToolsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide9-43You can set a value between 1 and 240 seconds (in 1 second increments).10 seconds is set at the time of factory shipment.Idle TimeoutThe amount of time to wait is set according to the operations listed below when document is placed onthe document glass and being scanned.The amount of time that passes to continue to the next job assuming that there is no additionaldocument to be loaded.You can select 20 seconds, 30 seconds, 60 seconds, or 90 seconds.30 seconds is set at the time of factory shipment.Job CancelSets whether the machine automatically cancel the job when an error occurs.You can select On or Off. If On is selected, you can set a value between 60 and 5940 seconds (in 1second increments).600 seconds is set at the time of factory shipment.ClockSets the time on the machine's system clock. This item sets the clock used to print the current time onthe reports.Notes• This item can only be set when the Fax Kit or Network Kit is installed.• When setting the time for the first time, first set the Date Format and Time Format.Follow the steps below to make the settings.Date & TimeSet the current date and time.You can select from UTC -12:00 to +13:00.
