Environment SettingsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide2-13Setting the Send E-mail FunctionSMTP Server SettingsUse the SMTP server to send an e-mail.Use Xerox ® CentreWare® Internet Services to set the SMTP server.The items to be set are shown below.Note If you selected None for Login Credentials for the Machine to access the SMTP Server to sendautomated e-mails, you can leave the Login Name, Password and Retype Password fields blank.To make the settings:1. Start Xerox ® CentreWare ® Internet Services.For information on how to start Xerox ® CentreWare ® Internet Services, refer to Starting Xerox®CentreWare® Internet Services on page 2-18.Item DescriptionSMTP Server IP Address/Host Name Enter the SMTP server's IP address as an IPv4 or IPv6 address or inFQDN format (up to 256 characters).Port Number for sending E-mail Set the SMTP server's port No. (a value between 1 and 65535).Login Credentials for the Machine toaccess the SMTP Server to sendautomated e-mailsSelect None or SMTP AUTH to indicate whether to perform SMTPauthentication when sending an e-mail.Login Name Enter the SMTP server login name (between 1 and 64 ASCII codecharacters).Password Enter the authentication password for the SMTP server (between 1and 64 ASCII code characters).Retype Password Verify the SMTP server authentication password you entered by re-entering it here.
