ToolsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide9-34Fax SettingsUsed to set the functions for the Fax feature.If Unknown is set for Region, no other settings besides Region are shown. When you use the faxfunction, be sure to make the Region setting and Clock in System Settings.The machine needs to be restarted whenever the Fax Settings are changed.For information on how to display the Fax Settings screen, refer to System Settings Procedure onpage 9-1.ModeSets the method used to receive faxes automatically when an external phone is mounted.This item is set to Fax at the time of factory shipment.FaxSet Fax Mode to use machine as a fax machine only. The machine receives faxes automatically afterthe number of rings set in Fax Answer.Note The machine can also be used as a phone to make outgoing calls.Tel/FaxSet TEL/FAX Mode to use the machine as both a fax machine and phone. Phone calls can be answeredby picking up the receiver before the number of rings set in Tel/Fax Answer is exceeded. If the call isfrom fax machine, the fax can be received manually.Fax AnswerSets the external phone's number of rings when Mode is set to Fax.You can set a value between 1 and 15 redials (in increments of 1).Note The default value varies by region. The default value is set when Region is set.Tel/Fax AnswerSets the external phone's number of rings when Mode is set to Tel/Fax.You can set a value between 1 and 15 rings (in increments of 1).The time is set to 2 times at the time of factory shipment.The default value varies by region. The default value is set when Region is set.
