ToolsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide9-30Copy SettingsUsed to set the functions for the Copy feature.For information on how to display the Copy Settings screen, refer to System Settings Procedure onpage 9-1.SharpnessYou can select Soften +2, Soften +1, Normal, Sharpen +1, or Sharpen +2.Normal sets the sharpness at the standard level; Soften +2 sets it lower; Sharpen +2 sets it higher.Normal is set at the time of factory shipment.For more information, refer to Scan Settings > Sharpness on page 9-32.Background SuppressionSets whether to suppress the document’s background color.You can select Off or On.On is set at the time of factory shipment.For more information, refer to Scan Settings > Background Suppression on page 9-32.Back. Suppression LevelSets the background suppression level used when Background Suppression is set to On in CopySettings.You can select from Low, Normal, Higher +1, Higher +2, and Higher +3. Normal is the standardsuppression level, Low is the lowest suppression Level, and Higher +3 is the highest suppression level.Normal is set at the time of factory shipment.For more information, refer to Scan Settings > Back. Suppression Level on page 9-32.Reduce/Enlarge PresetUsed to set the preset Reduce/Enlarge value by selecting Copy > Reduce/Enlarge in the DefaultSettings.You can set a value between 25 and 400% (in 1% increments).400% is set at the time of factory shipment.For more information, refer to Default Settings > Copy > Reduce/Enlarge on page 9-8.
