Loading PaperXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide4-4Storing and Handling PaperPlease keep the following points in mind when storing paper• Store paper inside a cabinet or other dry place. Paper that has absorbed moisture can result inpaper jams and lower image quality.• After opening a package of paper, wrap and store any remaining paper. We recommend that youstore remaining paper in moisture prevention packets.• Store paper on a flat surface to prevent bends or warping.Please adhere to the following points when loading paper in a tray• Align the stack of paper neatly before loading it in a tray.• Do not use creased or wrinkled paper.• Do not use warped or curled paper.• Do not load paper of mixed sizes together into a tray.• Take care not to touch the print side. Oils from your skin could adhere to the print media, whichcould affect printing quality. If unavoidable, be sure to use a finger cot, gloves, or other means tocover your fingers before touching the print media.• LEF is recommended for heavyweight media feeds from the Tray 5 (bypass). If a misfeed occurs,please apply an intentional upper curl to the leading edge of the paper.• Do not load paper above the maximum fill line in Trays 1 to 5. It may cause paper jams.• When Heavyweight Paper/Extra-HW Paper is supplied to Tray 5 and causes paper jams, reduce thepaper quantity or turn over the paper in Tray 5.
