Environment SettingsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide2-32• IP Filter Rule ListThe accessible IPv6 address is displayed.• Add buttonThe Add IP Filter Rule - IPv6 screen is displayed. Adds an accessible IPv6 address. You can add upto 10 IPv6 addresses.- Source IP Address:You can set the accessible IP address.- Source IP Mask:You can set the prefix length of the accessible IP address (Default: 0)• Edit buttonThe Edit IP Filter Rule - IPv6 screen is displayed. Edits the accessible IPv6 address.- Source IP Address:You can set the accessible IP address. (Default: 0:0:0:0:0:0:0:0)- Source IP Mask:You can set the prefix length of the accessible IP address. (Default: 0)• Delete buttonYou can delete the accessible IPv6 address by pressing this button.Apply buttonYou can apply changes by pressing this button.Note Reboot the machine to enable new settings.System Administrator Settings (Security)You can set the system administrator's user ID and the passcode.System Administrator Settings• Administrator's Login IDYou can enter the system administrator's user ID (between 1 and 32 ASCII code characters inlength, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":". (Default: admin)• Administrator's PasscodeYou can set the system administrator's passcode (between 4 and 12 ASCII code characters orblank). (Default: 1111)• Retype Administrator's PasscodeYou need to re-enter the system administrator’s passcode.
