Machine StatusXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide10-8Note The printed items will vary according to the machine's settings.*1 The Fax Kit is required to use this feature.*2 The machine automatically prints the report. For more information, refer to Fax Settings on page 9-34.*3 The Network Kit is required to use this feature.Follow the steps below to print a report or list.1. Press the Machine Status button.Fax Activity Report *1 Used to check whether faxes were sent/received normally. For eachsent/received fax, prints the sender or recipient name and the transmissionresult/status.This report is not printed in the following cases:• When sending a fax using the redial function• When the fax waiting to be sent was deleted during transmission standbyor Redial standby• When the power was shut off or a system error occurred duringtransmissionThe machine can be set up to automatically print transmission results afterevery 50 faxes are sent/received.For information on how to set the machine to print the Fax Activity Reportautomatically, refer to Activity Report on page 9-39.For information about the items in the Fax Activity Report, refer to Fax ActivityReport on page 14-19).Fax Transmission Report *1 *2 Prints the communication results.Fax Broadcast Report *1 *2 Prints the broadcast communication results.Unprocessed Fax Job *1 *2 Prints the list of accumulated documents being deleted due to power cut. Thisreport is automatically printed when the machine power is switched on.Report/List DescriptionMachine Status button
