ToolsXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide9-6Send Header Used to set whether to send information including the printdate and sender information on outgoing faxes or not.P. 9-36Company Name Used to register the sender name. P. 9-36Fax Number Used to register the machine's fax number. P. 9-36Forward Used to set whether to forward the incoming fax or not. P. 9-36Auto Reduce On Receipt Used to set whether to reduce the image size when theincoming data is too large for the output paper.P. 9-37Border Limit Used to set the image size limit at which to split the pagewhen the incoming data is too large for the output paper.P. 9-37Receive Size Used to restrict the paper size of faxes that can be received. P. 9-37Print Size (Received Letter) Used to set whether to print the incoming Letter size dataon Letter paper or A4 paper.P. 9-38Immediate Fax Switch Used to set the remaining memory level at which to moveto immediate communications during fax transmission.P. 9-38Off Hook Level Used to set the detection level of an off-the-hook receiverwhen using an external phone.P. 9-38Region Used to set the region name. P. 9-38Activity Report Used to set whether to automatically print out the results ofsent and received documents that are stored in memory.P. 9-39Transmission Report Used to set the method used to print fax transmissionresults.P. 9-40Broadcast Report Used to set the method of printing transmission resultswhen "broadcasting" (sending the same fax to multiplerecipients at once).P. 9-40Protocol Report Used to set the method used to print protocols. P. 9-41System Settings Used to set other functions. P. 9-42Power Saver Timer Used to set the amount of time the machine waits beforeentering its power-saving modes.P. 9-42Auto Reset Used to set the amount of time the machine waits beforeresetting the screen while an operation is being performed.P. 9-42Auto Print Used to set the amount of time the machine waits beforestarting to print and after receiving a print job.P. 9-42Idle Timeout Used to set the amount of time the machine waits beforedocuments are added.P. 9-43Job Cancel Used to set whether to automatically cancel the job when ajob error occurs.P. 9-43Clock Used to set the time on the machine's system clock. P. 9-43Item Description See Page
