CopyXerox ® WorkCentre® 5022/5024 Multifunction PrinterUser Guide5-21After placing the document on the document glass, make sure to set the size and orientation of thedocument.Note If the document size is larger than the original size, the image may be cut off or may haveshadows at the edges. Make sure to choose an appropriate document size.1. Select Original Size , and then press the OK button.2. Select the document size, and then press the OK button.Auto The machine automatically detects the document size from among thesupported standard sizes.Fixed document size(preset)Select the size of the placed document.Original Size is automatically set to Auto when the document is placed in thedocument feeder.Customs 1 to 5 You can select the registered paper size.For information on registering Customs 1 to 5, refer to Custom Paper Size Settingson page 9-18.Custom Size Select Custom Size to set a non-standard document size. You can set a Y direction(vertical) between 86 and 297 mm (in 1 mm increments), and X direction(horizontal) between 86 and 432 mm (in 1 mm increments).OffPages per Side...AutoReduce/Enlarge...AutoOriginal Size...Copy 1111Original Size Qty. 1A3 (297x420mm)AutoA4 (297x210mm)
