Toshiba VFNC3-2001P Instruction Manual

E6581595C-233.1 How to Set the Setup MenuWarningInstruction• If incorrect setting, the drive may has some damage or unexpected movement. Be sure to set thesetup parameter correctly.Set the setup menu according to the logic for control input signals used and the base frequency of the motorconnected. (If you are not sure which setup menu should be selected region codes and what values should bespecified, consult your distributer.)Each setup menu automatically sets all parameters relating to the logic for control input signals used and the basefrequency of the motor connected. (See the table on the following page.)Follow these steps to change the setup menu [Example: Selecting a region code to ]Panel operated LED display Operation Power on. (set is blinking)Turn the setting dial, and select region code ""(Europe).⇔ Press the center of the setting dial to determine theregion. The operation frequency is displayed (Standby).☆ When changing the region selected in the setup menu, the setup menu can be called again by the followingmethod. Note, however, that all parameter settings return to standard defaults.• Set parameter  to "".• Set parameter  to "".☆ The parameter settings in the table on the following page can be changed individually even after they areselected in the setup menu.euasiajpusaefesotomasyon.com -Toshiba inverter,drive,servo,plc