Toshiba VFNC3-2001P Instruction Manual

E6581595F-6066.18.3 Displaying the motor or the line speed : Free unit display scale• FunctionThe frequency or any other item displayed on the monitor can be converted freely into the rotationalspeed of the motor, the operating speed of the load, and so on.The value obtained by multiplying the displayed frequency by the -set value will be displayed asfollows:Value displayed = Monitor-displayed or parameter-set frequency × 1) Displaying the motor speedTo switch the display mode from 60Hz (default setting) to 1800min -1 (the rotating speed of the 4P motor) ＝×.=＝．Hz2) Displaying the speed of the loading unitTo switch the display mode from 60Hz (default setting) to 6m/min -1 (the speed of the conveyer)  ＝． ＝.×.=.HzNote: This parameter displays the inverter output frequency as the value obtained by multiplying it by apositive number. This does not mean that the actual motor speed or line speed are indicatedwith accuracy.efesotomasyon.com -Toshiba inverter,drive,servo,plc