74CALLER IDSELECTING YOUR CALLER ID DISPLAYSimultaneous display of Caller ID name and number on incoming CO calls on bothlines of display keysets is supported on all OfficeServ systems. On Transferred COcalls, you can decide if you want to see the Caller ID name or Caller ID number inthe display. Regardless of which data is selected, you can press the NND button toview the other pieces of Caller ID information. To select the type of Caller ID infor-mation you wish to view:• With the handset on-hook, press Transfer and then dial 119.• To set the first line of a ringing call display dial 0.• To set the second line of a ringing call display dial 1.Set the data to display from the following:- To show nothing dial 0.- To show Caller ID Number dial 1.- To show Caller ID Name dial 2.- To show the DID Number the call came in on dial 3.- To show the Name of the DID the call came in on dial 4.- To show the Name of the Group the call came in for dial 5.- To show the DID Number and then Name of the DID dial 6.- To show the Name of the DID and then the DID Number dial 7.• To set the top line of the display shown after answering a call dial 2.Set the data to display from the following:- To show Caller ID Number dial 0.- To show Caller ID Name dial 1.- To show the DID Number the call came in on dial 2.- To show the Name of the DID the call came in on dial 3.- To show Caller ID Number and then the DID Number dial 4.- To show Caller ID Name and then the DID Number dial 5.- To show the DID Number and then the name of the DID dial 6.- To show the Name of the DID and then the DID Number dial 7.- To show the C.O. line information dial 8.• To set the format if the C.O. line information when the above is set to show C.O.line information dial 3.- To show the C.O. line number and the dialed or Caller ID Number dial 0.- To show only the dialed or Caller ID Number dial 1.• Press Transfer to exit and store your selection.75VIEWING THE NEXT CALLER ID CALLIn the event that you have a call waiting or a camped-on call at your keyset, youcan press the Next button to display the Caller ID information associated with thecall in queue at your keyset. Either the CID name or CID number will show in thedisplay depending on you Name/Number selection.To view Caller ID information for calls that have been camped-on to your keyset,press the Next button.INQUIRE CALLER ID PARK/HOLD INFOIf you are informed that an incoming call is on hold or has been parked for you, youmay view the Caller ID information before you retrieve the call. This may influencehow you choose to handle the call.From an idle keyset:• Press the Inquire button—OR—press CID button.• Dial the trunk number.• You may now answer the call by pressing the Answer button—OR—Name/Number to view more information about this call—OR—you canreturn to the idle condition by pressing Ignore.If you are on a call:• Press the Inquire button. Your existing call will go on hold.• Dial the trunk number.• You may now answer the call by pressing the Answer button—OR—you mayuse Name/Number to view more information about this call—OR—you canreturn to the idle condition by pressing Ignore.NOTES:1. If you are on an intercom call or you have Automatic Hold turned off, you mustfinish the existing call or place it on hold before inquiring.2. If you inquire about an outgoing call, you will receive a [call no longer avail-able] display.
