• With the handset on-hook, press TRANSFER and then dial 110.• Dial 061 to turn ring preference on or 060 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option, press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-diately enter the option.• Scroll to RING PREF, press ENTER to change option status.• Press CANCEL to enter change and return to Main Configuration Menu—OR—press END to return to idle screen.AUTO ANSWER CO CALLSThis option will allow CO calls that directly ring your phone to auto answer. Whena CO call arrives at your station and this option set for ON your phone will soundtwo beeps, the same as when a screened transfer is completed, and you will beconnected to the CO call. In order for this option to work the station must also beprogrammed for auto answer (see Set Answer Mode).• Press MENU button.• Scroll to SETUP option, press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 and imme-diately enter the option.• Scroll to AUTO ANS CO CALL, press ENTER to change option status.• Press CANCEL to enter change and return to Main Configuration Menu—OR—press END to return to idle screen.NOTE: Outside lines must ring your station directly for the Auto Answer CO towork. Lines ringing a station group will not cause your phone to Auto Answer thecall.DISPLAY SPEED DIAL NAMEThis option allows you to view the name associated with a speed dial number asit is dialed.• With you handset on-hook, press TRANSFER and then dial 110.• Press 111 to turn DISP SPDNAME on or 110 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP option, press ENTER.55From the LCD:• Press MENU button.• Scroll to SETUP option, press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to HOT KEYPAD, press ENTER to change option status.• Press CANCEL to enter change and return to Main Configuration Menu—OR—press END to return to idle screen.KEY CONFIRMATION TONEYou can hear a short beep (confirmation tone) each time you press a button on thedial pad. This tone can be turned on or off.• While on-hook, press TRANSFER and then dial 110.• Dial 040 to turn tones off or 041 to turn tones on.• Press TRANSFER to store your selection.• Additional ring tones can be selected from the SOUND/SCREEN, “KeytoneSelect” option.REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internal pageafter you return your keyset to idle. To enable this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 051 to turn this feature on or 050 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to SETUP and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 6 andimmediately enter the option.• Scroll to PAGE REJOIN, press ENTER to change option status.• Press CANCEL to enter change and return to the Main Configuration Menu—OR—press END to return to idle screen.RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or pressthe SEND button.This method will always answer calls in the order they arrived atyour keyset.When you turn ring preference off, you must press the flashing buttonto answer a call, allowing you to answer calls in the order you choose.54
