3. When a station user places his/her keyset in Forward All mode and he/she doesnot have a FORWARD ALL key, the TRSF key will light to indicate Forward Allhas been set and calls to this station have been transferred elsewhere.FORWARD BUSYTo forward calls when you are on the phone:• Dial 602 plus the destination you want the call to forward to.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press SPK before you begin dialing.FORWARD NO ANSWERTo forward calls when you do not answer:• Dial 603 plus the destination you want the call forward to.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press SPK before you begin dialing.FORWARD BUSY/NO ANSWERIf you have both a Forward on Busy destination and a Forward No Answer desti-nation programmed, you may set both of these at the same time:• Dial 604.• Receive confirmation tone and hang up.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press SPK or the MONITOR key if you are using a 7B phone before you begindialing.FORWARD FOLLOW MEWhen you want all calls to your extension forwarded to the extension where youare now:• Dial 606 plus your extension number.• Receive confirmation tone and hang up.21NOTE: To leave the conference, hang up. Control is passed to the next internal sta-tion. If there are no internal stations and you wish to leave outside lines connect-ed together in a trunk to trunk conference, press the CONF key plus the CALL but-ton that the call appears on or follow the instructions to drop a party and use yourextension number. When they hang up, the lines will release automatically. PressCONF to rejoin a trunk to trunk conference.CONFERENCE SPLITTINGIf you are the controlling party of a conference and your keyset has the Auto Holdfeature turned on (see customizing your keyset) and all of the outside linesinvolved in the conference appear as buttons on your keyset, you can split the con-ference into separate calls as follows:• Press any one of the outside line buttons. That outside line will remain steadygreen to indicate you are still connected to it. All other outside lines in the con-ference will be placed on system hold at your keyset. All intercom callers in theconference will be disconnected. You may now speak with each caller private-ly and transfer them as usual or reestablish another conference.FORWARDING CALLSYou may forward your calls to another station, group of stations or an externaltelephone number. Program a destination for the type of forwarding you want asdetailed below. If you have FWD ALL, FWD BUSY and FWD NO ANSWER keys,press one to turn that forward feature on. A steady red light reminds you what for-ward condition is activated.You can clear all call forward conditions set at your station by lifting the handsetand dialing 600.FORWARD ALL CALLSTo forward all your calls under any condition:• Dial 601 plus the destination you want the call to forward to.• Receive confirmation tone and hang up.NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the handset orpress SPK before you begin dialing.2. The station that receives a Forwarded All call can transfer the call to the for-warded station.This is useful when you are expecting an important call but youdo not wish to be disturbed by other calls.20
