89Record imagesStep 1Display the top page of the operation window.(☞ Page 77)Step 2Click the [HDD] tab.→ The [HDD] tab will be displayed.Step 3Click the button in the [Rec] box.Continue clicking the button until the recordingbutton and the recording stop button appear.→ The recording button will appear in the [Rec] box.Step 4Click the recording button to start recording.• At the default, images from all the connectedcameras will be recorded.• When images are being recorded in the recordingmode with a higher priority than the manualrecording, the manual recording will not start untilthe recording with a higher priority ends.Refer to page 37 for further information about therecording mode and their priorities.→ When recording starts, the [REC] indicator in thestatus display area will light red.Step 5To stop recording, click the stop recording button.→ The [REC] indicator in the status display area willgo off.Note:• When recording in a different recording mode isbeing performed simultaneously, the [REC] indica-tor will not go off since the recording in a differentrecording mode will continue even when the man-ual recording is stopped.• No image will be recorded by the manual record-ing for a camera channel from which no videoinput is sent. When video input is sent from thecamera channel, the manual recording will startrecording images from it.Live images can be recorded on the recorder. Images from up to 16 cameras can be recorded on a singlerecorder.Record images (Manual recording)Recording can be started and stopped manually.
