Panasonic WJ-HD616K Operating Instructions Manual

Also see for WJ-HD616G: Installation guide

Contents

Panasonic WJ-HD616K Operating Instructions Manual Manual pdf 81 page image

81q The status of image (live image/recordedimage) display operation will be displayed.: Indicates that live images are being dis-played.: Indicates that playback images are beingdisplayed.: Indicates that reverse playback images arebeing displayed.: Indicates that fast playback images arebeing displayed.: Indicates that fast reverse playback imagesare being displayed.: Indicates that a paused image is being dis-played.: Indicates that recorded images/audio arebeing downloaded.: Indicates that downloading of recordedimages/audio is completed.[Step 1] - [Step 7]: Indicates the playback speed.: Normal playback speed (1x): Approx. 2x playback speed: Approx. 5x playback speed: Approx. 10x playback speed: Approx. 20x playback speed: Approx. 50x playback speed: Approx. 100x playback speed: Indicates that the sequence display is beingperformed.: Indicates the normal recording area or theevent recording area on the hard disk drive isbeing selected.: Indicates that the DVD drive is being select-ed.: Indicates that the SDHC/SD memory card isbeing selected.: Indicates that RAID recovery is being per-formed.: Indicates that a recording events are beingfiltered. Refer to page 93 for further informa-tion about filtering of recording events.w [REC] indicatorIndicates the status of recording.: Indicates that recording is being performed.: Indicates that recording is not being per-formed.e Indicates the following statuses: Indicates that the camera is inoperable sincea user with a higher priority is currently operat-ing the camera.: Indicates that copying is being performed.: Indicates that recorded images are beingdeleted.r Indicates information about events and errors.[ALARM SUSPEND] button: Clicking this button will disable the subse-quent alarm actions (☞ page 102).: Indicates that the alarm is being suspend-ed.[ALM] button: This button will be displayed when an eventoccurs. The alarm action will be canceled byclicking this button (☞ page 102).[ERR] button: Indicates an error occurrence. The error actionwill be canceled by clicking this button. Referto pages 18 - 19 for further information abouterrors.Note:• The emergency recording will not stop by clickingthe [ALM] button when the emergency recordingis being performed. It will stop only when"Continue" is selected for "Recording duration" onthe "Emergency rec." page.Status display arearewq