63Example of video output (analog) connectionOperations using the buttons on the front panel (operatingsection)It is possible to operate using the buttons on the front panel. When selecting monitor 2, images will be dis-played on monitor 2 connected to the first WJ-HD616K. When selecting monitor 1, images will be displayed onmonitor 1 connected to the WJ-HD616K currently being operated.Only the WJ-HD616K currently being operated is subject to operation. It is impossible to operate the otherWJ-HD616K using the buttons on another WJ-HD616K.Operate using the system controller• When using the system controller whose unit address is 001It is possible to operate all the WJ-HD616K/WJ-HD716K in cascading connection by designating the unitnumber from a PS·Data compatible system controller.Refer to the operating instructions of the system controller for how to control it in the PS·Data mode.Together with this document, refer to "Operation Using The System Controllers" (PDF) on the providedCD-ROM.• When using the system controller whose unit address is 002 - 004It is possible to operate all the WJ-HD616K/WJ-HD716K using the PS·Data compatible system controller.However, camera selection on monitor 2 is unavailable when "Off" is selected for "Cascade sequence".Monitor 2Monitor 1Monitor 1Monitor 1Monitor 1PS·Data compatiblesystem controller(Unit address: 002)Unit address (system): 001First recorderUnit address (system): 002Second recorderUnit address (system): 003Third recorderUnit address (system): 004Fourth recorder* Do not assign unit address numbers (controller) 001 - 004 and also numbers used for the other devices to each the WJ-HD616K.(Unit address: 003)(Unit address: 00)4321876512110/10916151413MOUSEDigital Disc Recorder WJ-HD6164321876512110/10916151413MOUSEDigital Disc Recorder WJ-HD6164321876512110/10916151413MOUSEDigital Disc Recorder WJ-HD6164321876512110/10916151413MOUSEDigital Disc Recorder WJ-HD616(Unit address: 001)