43Play images from a designated pointIt is possible to start playback from a designated time and date or the latest recorded image.Playback operation can be made while recording.Playback images will be displayed on monitor 2.Play image recorded at a designated time and dateStart playback by designating the desired time and date of a recorded image.Step 1Press the [GOTO DATE] button on the front panel.→ The "Go to date" window will be displayed.Note:• When using the mouse, click "Go to date" fromthe "Sub Menu" to display the "Go to date" win-dow.Step 2Set time and date by rotating the jog dial (inside).Note:• When the [SET] button is pressed after moving thecursor onto the [Current time] button, the currenttime and date will be entered.Step 3Move the cursor onto the [B] (play) button on the "Goto date" window, and then press the [SET] button.→ The "Go to date" window will close and playbackof recorded image from the entered time and datewill start.Note:• When no image is found at the designated timeand date, the following action will be taken.• When images recorded after the designatedtime and date are found, playback will startfrom the oldest recorded image among them.• When no image was recorded after the desig-nated time and date, playback will start fromthe latest image recorded before the designat-ed time and date.Step 4To stop the playback, press the [STOP] button on thefront panel.→ Playback will stop. Playback on monitor 2 will beswitched to live image display.
