34Display images from multiple cameras sequentially (sequencedisplay)The sequence display function is the function that can automatically switch and display images from multiplecameras sequentially.The sequence display will be performed according to the settings configured in advance.The setting for the sequence display can be configured on "Live sequence" on the "Monitor1" tab (or"Monitor2" tab) under "Display" of the setup menu. (☞ Installation Guide)Operations using the buttons on the front panel(operating section)Step 1Select a monitor to display images.(☞ Page 29)Step 2Press the [SEQ] button.→ The sequence display will be performed accordingto the configured settings.The [SEQ] button will light during the sequencedisplay.Step 3To stop the sequence display, press the [SEQ] buttonagain.To resume the sequence display, press the [SEQ] but-ton.When the sequence display is resumed, the sequencedisplay will be performed from the first step of thesequence again.Operations using a mouseStep 1Select a monitor to display images.(☞ Page 29)Step 2Display the operation panel by right-click, and thenclick the [SEQ] button.→ The sequence display will be performed accordingto the configured settings.The [SEQ] button will light during the sequencedisplay.Step 3To stop the sequence display, click the [SEQ] buttonagain.To resume the sequence display, click the [SEQ] but-ton. When the sequence display is resumed, thesequence display will be performed from step 1again.
