1.6.1.5 Speed Dialling—Personal/SystemDescriptionAn extension user can make calls using abbreviated dialling for frequently dialled numbers which are storedin the PBX extension data, or the PBX system data.Personal Speed Dialling is also known as Station Speed Dialling.Conditions[General]• Any number (e.g., telephone number, feature number) can be stored in a speed dialling number. A namecan be assigned to each Personal Speed Dialling number through personal programming, and SystemSpeed Dialling number.• Call Directory—Speed DiallingDisplay PT users can make a call by selecting stored names on the display.[Personal Speed Dialling]• Display LockAn extension user can lock the Personal Speed Dialling number display to prevent the numbers from beingviewed at any extension through personal programming (Display Lock). In this case, the Incoming/OutgoingCall Log displays and the SVM Log display are also locked, and the voice messages in the user’s messagebox cannot be played back. An extension personal identification number (PIN) is required to use thisfeature. (® 1.28.1 Extension Personal Identification Number (PIN))[System Speed Dialling]• TRS/Barring Override by System Speed DiallingIt is possible to override the TRS/Barring using the System Speed Dialling. (® 1.9.1 Toll Restriction (TRS)/Call Barring (Barring))• System Speed Dialling Display by AUTO DIAL/STORE ButtonPressing the AUTO DIAL/STORE button on a display DPT while on-hook can display the System SpeedDialling Directory.• System Speed Dialling numbers can be assigned separately for each tenant. Each tenant can select touse either the original set of common System Speed Dialling numbers or the set of System Speed Diallingnumbers designated specifically for that tenant.PT Programming Manual References[001] System Speed Dialling Number[002] System Speed Dialling Name[509] TRS/Barring Level for System Speed DiallingFeature Guide References3.1 Capacity of System ResourcesUser Manual References1.2.2 Easy Dialling1.13.1 Using the Call Log1.13.2 Using the Directories3.1.2 Settings on the Programming ModeFeature Guide 971.6.1 Memory Dialling Features
