1.1.1.5 Calling Line Identification (CLI) DistributionDescriptionDirects an incoming trunk call to a preprogrammed destination when the caller’s identification number (e.g.,Caller ID) matches the number in the System Speed Dialling Table that is used as the Caller ID Table. EachCaller ID number (telephone number for each System Speed Dialling number) can have its own destination.CLI Feature Description & ReferenceCaller ID Caller’s number is sent from an analogue trunk.® 1.18.1 Caller IDCalling Line IdentificationPresentation (CLIP)Caller’s number is sent from an ISDN line.® 1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)Automatic Number Identification(ANI)Caller’s number is sent from an E1 or T1 line.® 1.22.1 E1 Line Service® 1.23.1 T1 Line ServiceCLI always works in conjunction with the following call distribution methods:a. DILb. DID/DDIc. MSN Ringing ServiceEach trunk (for DIL) and the DID/DDI/MSN number can enable or disable the CLI feature for each time mode(day/lunch/break/night) (® 2.2.4 Time Service).When the call has Caller ID information and the CLI is enabled for the time mode, the call will be handled bythe CLI method.[Programming Example of System Speed Dialling Table for CLI]Location(System SpeedDialling No.)System SpeedDialling Name*1 Telephone No.*2 CLI Destination000 ABC Company 901234567890 200001 : : :: : : :*1 ® [002] System Speed Dialling Name*2 ® [001] System Speed Dialling NumberExplanation:If the caller’s number is "0123-456-7890" (The Trunk Access number is disregarded):1. Checks the number in the table.® Matches the number in location 000.2. The call is routed to the CLI destination, extension 200.Conditions• Automatic Caller ID Number ModificationFeature Guide 251.1.1 Incoming Trunk Call Features
