Panasonic KX-TDA100D Features Manual

Also see for KX-TDA100D: Programming manual User manual Installation guide Features guide Programming manual

Contents

Panasonic KX-TDA100D Features Manual Manual pdf 84 page image

1.5.4.7 Pause InsertionDescriptionPressing a PAUSE button inserts a preprogrammed Pause time between digits of a user-dialled number beforethe number is dialled out, allowing certain numbers separated with a pause to be used to access certainfeatures (e.g., access codes, seizing idles lines, etc.).When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases, exceptfor the following access codes where a pause is automatically inserted between the user-dialled access codeand the subsequent digits:a. Host PBX Access code (® 1.5.4.8 Host PBX Access Code (Access Code to the Telephone Companyfrom a Host PBX))b. Special Carrier Access code (® 1.5.4.9 Special Carrier Access Code)c. Second Dial Tone Waiting codeConditions• The Pause time is programmable for each trunk.• Pauses can be stored in Memory Dialling.• When a Second Dial Tone Waiting code is dialled after seizing a trunk, a preprogrammed number of pausesare inserted after the code.• ARSA pause is not automatically inserted between the user-dialled access code and the subsequent digitswhen the ARS mode is enabled. (1.10.1 Automatic Route Selection (ARS))PT Programming Manual References[416] LCOT Pause Time84 Feature Guide1.5.4 Trunk Call Features