Panasonic KX-TDA100D Features Manual

Also see for KX-TDA100D: Programming manual User manual Installation guide Features guide Programming manual

Contents

Panasonic KX-TDA100D Features Manual Manual pdf 324 page image

1.32 Computer Telephony Integration (CTI) Features1.32.1 Computer Telephony Integration (CTI)DescriptionConnecting a PC to a DPT, or connecting a CTI Server to this PBX, enables extension users to make use ofadvanced features by using the stored data in the PC or the CTI Server. The features that are available throughCTI depend on the CTI application software used on connected PCs.There are two types of CTI as follows:1. First Party Call Control2. Third Party Call Control1. First Party Call ControlA PC is connected to a DPT using a USB port (USB Module) attached to the DPT. The PC monitors thestatus of the DPT and controls the DPT.PBXPCUSBDPT2. Third Party Call ControlA CTI Server is connected to the PBX using (1) the USB port of the PBX, or (2) the Ethernet port of theCTI-LINK card as a CTI interface. PCs monitor the status of the PBX and control the PBX via the CTIServer.When a call is received, the CTI Server can be used to decide call routing, and to send information aboutthe call to the destination extension user’s PC. So, for example, if the call is from a customer, thatcustomer’s account information can be shown automatically on the screen of the PC at the same time as324 Feature Guide1.32.1 Computer Telephony Integration (CTI)