Panasonic KX-TDA100D Features Manual

Also see for KX-TDA100D: Programming manual User manual Installation guide Features guide Programming manual

Contents

Panasonic KX-TDA100D Features Manual Manual pdf 308 page image

1.30.4.4 Call Transfer (CT)—by QSIGDescriptionThe PBX transfers the call to a destination extension in another PBX in QSIG network.If the same trunk group is used for the incoming call and the transferred call, the following situation will bepossible.[Example]PBX-1QSIGPBX-2Dials "2000".PBX-1QSIGPBX-2Extn. 1000 Extn. 1001 Extn. 2000Extn. 1000 Extn. 1001 Extn. 2000Call to 20001Transferredto 1001231 Extension 1000 of PBX-1 dialsextension number "2000", and the callis sent to extension "2000" of PBX-2through QSIG network.2The call is transferred from extension2000 to extension "1001" of PBX-1.3The call between PBX-1 and PBX-2 isreleased, and the call is connecteddirectly to the transfer destination ofextension 2000.Conditions• This feature complies with European Telecommunication Standard (ETS) specification ETS 300 261, Calltransfer supplementary service.• This feature can be enabled or disabled on an ISDN (QSIG) port basis.• Call Transfer with Announcement and Call Transfer without Announcement is possible (® 1.12.1 CallTransfer).User Manual References1.4.1 Transferring a Call (Call Transfer)308 Feature Guide1.30.4 QSIG Standard Features